Detcon 240 Manuel d'instructions télécharger pdf (Page 17)

Sentinel CX

Sentinel CX Sensor Station IM Rev. 1.2 Page 13 of 13

10. Unplug the connector from the transceiver, and move it out of the way to gain access to the screws

holding the battery bracket in place. There should be enough of a service loop to safely move this

connector out of the way for removal/installation of the battery bracket.

Figure 13 Connector to Transceiver

11. Remove the 6-32 screws and washers holding the battery bracket is place, and remove the bracket

from the enclosure. Retain the screws and washers for installation of the bracket with the battery

pack.

Figure 14 Battery Bracket in position

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Pas de commentaire

Detcon 240 Manuel d'instructions Page 17