Detcon 240 Manuel d'instructions télécharger pdf (Page 25)

240 Operators Manual

Model 240 Operator Manual Rev. 1.8 Page 21 of 29

Figure 10 Serial connection and jumper locations

Make the connection from the Model X40 controller to your PC (COM1) using the supplied cable. The

controller’s 1/8” jack connection is located on the bottom of the PCB.

From the Start menu, select Programs> Accessories> Communications> Hyper Terminal.

Figure 11 Invoking Hyper Terminal

Hyper Terminal will open with the following Connection Description Dialog box. Type “X40 Download”

as the name for the connection and click ‘OK’.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Pas de commentaire

Detcon 240 Manuel d'instructions Page 25